Walls exposed to rainwater need a suitable waterproof coating based on the building’s condition, while interior areas also need to be protected during the work process. Aquaproof helps protect building areas that require waterproof coating, while ALVAboard Floor & Wall Protector helps protect interior floors and walls from splashes, friction, and impacts during work.
Why Do Walls Need Protection Against Leaks?
Exterior walls are among the areas constantly exposed to changing weather conditions, including rainwater. If there are hairline cracks, gaps, or surface areas that require additional protection, water can enter through these points and cause seepage.
Wall leaks are not always immediately visible as major problems. Damp stains, discoloration, peeling finishing layers, or wall sections that remain wet can indicate that the surface needs to be inspected.
Therefore, using waterproof coating paint is one step to consider when maintaining or repairing a building. Product selection and application methods should be adjusted to the surface condition and the product’s instructions for use.
Aquaproof for Wall and Roof Protection
Aquaproof is a waterproof coating paint designed to help protect building areas against water penetration. It is known as a pioneer of waterproof coating paint in Indonesia and has obtained SNI 8665:2018 certification for Water-Based Waterproof Coating Paint. Aquaproof is manufactured by a company that complies with ISO 9001 and ISO 14001 standards.
Its flexible and waterproof coating properties help support protection in suitable areas, such as walls and roofs. During application, surface preparation is an important step to ensure the coating process is carried out properly.
Readers who want to learn more about the product, application methods, and other building solutions, can find complete information on the official Aquaproof website.
When Working on Walls, Don’t Forget the Interior
Work on walls or other parts of a building can create new risks for interior areas. Ladders, equipment, materials, and workers’ activities may move across floors that were previously clean and tidy.
The risk of damage and stains can also arise during repair work. On surfaces such as marble and granite, temporary protection helps safeguard these areas from work activities that may cause stains, friction, or impacts.
This is where ALVAboard Floor & Wall Protector comes in as a solution. Made from Polypropylene (PP) Corrugated Sheet, this product protects various surfaces during construction and renovation.
ALVAboard Floor & Wall Protector has a thickness of 2 mm and a width of 1.25 meters, with two roll length options: 5 meters and 10 meters. The 10 meter variant can be an option for larger areas that require a longer protective covering, while the 5 meter variant is more practical for specific areas that need more compact coverage.
Both variants use PP Corrugated Sheet material with water-resistant properties, helping withstand friction and impacts from project equipment, the material is also reusable and recyclable. With these two length options, users can adjust the material to suit the area size and work requirements.
Differences Between Aquaproof and ALVAboard
Effective protection begins with understanding that each material has a different function and area of application.
| Aspect | Aquaproof | ALVAboard Floor & Wall Protector |
| Focus areas | Exterior walls, concrete slabs, roofs, and gutters, depending on application requirements | Floors, walls, and interior areas during work |
| Main function | Helps protect building areas such as exterior walls, concrete slabs, roofs, and gutters against the risk of water seepage and leaks | Helps maintain and protect surfaces against the risk of damage, scratches, or impacts during construction, renovation, project activities, or the movement of goods |
| Risks addressed | Rainwater, seepage, moisture, and leaks | Splashes, friction, and impacts |
| Material | Synthetic Elastomeric Polymer | Polypropylene (PP) Corrugated Sheet |
| Format | Coating paint, available in 1 kg, 4 kg, and 20 kg packaging | PP Corrugated Sheet in roll form, available in sizes of 2 mm × 1.25 m × 5 m and 2 mm × 1.25 m × 10 m |
| Application characteristics | Building protection | Temporary surface protection |
This distinction allows both products to be used in the same work process without treating their functions as interchangeable. Aquaproof focuses on building protection, while ALVAboard helps safeguard areas surrounding ongoing work activities.
To follow the latest information and activities from ALVAboard, readers can visit Instagram @alvaboard and Instagram @aquaproof_id.
How to Keep Renovation Areas Neat
Work areas should be protected before work begins to reduce the risk of damage from the outset.
First, inspect wall or roof areas that require waterproof protection. Clean and prepare the surfaces as needed before applying Aquaproof.
Second, cover floors and interior surfaces near the work area with ALVAboard Floor & Wall Protector. This step helps separate the work area from surfaces that need to remain protected.
Third, organize the routes used by workers and materials to prevent them from passing through unnecessary areas. The more controlled their movement is, the lower the risk of friction or impacts on finished surfaces.
Fourth, promptly clean splashes or dirt from the protective material to keep the work area organized. Once the work is complete, ALVAboard material that remains in good condition can be stored for future use.
This approach helps create a more organized renovation process. ALVAboard is supported by an integrated manufacturing facility in Tangerang and focuses on developing plastic sheet materials for various protection needs.
With this experience, ALVAboard serves as a trusted manufacturer for PP Corrugated Sheet material needs. Meanwhile, for users looking for the best solutions in Indonesia, the most important thing remains ensuring that materials are used according to their intended functions and work conditions.
Aquaproof x ALVAboard Educational Collaboration
The collaboration between Aquaproof and ALVAboard invites homeowners to take a more comprehensive approach to building protection. Walls and roofs require attention to water-related risks, while interior areas need protection from work activities.
Aquaproof brings its experience as a waterproof coating paint brand in Indonesia, while ALVAboard provides surface protection solutions made from PP Corrugated Sheet. Both serve different purposes but can support a more organized home improvement process.
This approach also demonstrates that the highest-quality materials should not be judged solely by their specifications, but also by how well their use matches actual needs in the field.
Instagram Collaboration Live & Rp2,000,000 Giveaway
This collaboration will also take place through an Instagram Collaboration Live on October 16, 2026. In addition to gaining information about home protection, readers will have the opportunity to participate in the Collaboration Giveaway, featuring total product prizes worth Rp2,000,000 for 3 lucky winners.
The giveaway mechanism and requirements will be announced through both brands’ official channels. Therefore, keep an eye on Instagram @alvaboard and Instagram @aquaproof_id for complete information.
PROTECT YOUR WALLS, SAFEGUARD YOUR INTERIOR, AND JOIN THE COLLABORATION!
Home renovation is not just about completing the work, but also about ensuring that every finished area remains protected. Through the Aquaproof and ALVAboard collaboration, readers can understand the importance of protecting walls against water-related risks while safeguarding interior areas during the work process.
Don’t miss the Aquaproof x ALVAboard Instagram Collaboration Live on October 16, 2026. In addition to gaining information about home protection, a Collaboration Giveaway is available, featuring total product prizes worth Rp2,000,000 for 3 lucky winners.
To learn about the giveaway mechanism and requirements, keep an eye on Instagram @alvaboard and Instagram @aquaproof_id.
