Ahead of the September 2026 Pilkades, TPS facilities should be prepared with 50 x 60 x 50 cm Voting Booths and 40 x 40 x 55 cm Ballot Boxes made from Polypropylene (PP) Corrugated Sheet. The ALVAboard voting facility package is 100% water-resistant, lightweight, sturdy, and reusable, helping committees prepare for the voting process while protecting ballot logistics during mobilization and use at the TPS.
TPS Logistics Readiness for the September 2026 Pilkades
Pilkades logistics should be checked before voting day, from the number of units to the physical condition of the voting booths and ballot boxes. The implementation of the 2026 Pilkades in several regions shows that logistics are distributed before voting day and include equipment such as ballots, ballot boxes, voting booths, voting tools, ink, padlocks, and seals.
On September 14, 2026, for example, the Belitung Regency Government began distributing logistics for the Simultaneous Pilkades to 13 villages for voting scheduled for September 20. The distribution included ballot boxes and voting booths as well as other supporting equipment.
Field conditions are also not always the same. Some TPS locations are near village government centers, while others require longer journeys with road or weather conditions that need to be taken into consideration. Therefore, P2KD and village officials need to inspect TPS facilities before the logistics are dispatched.
There are three main risks that are worth including in the checklist.
First, the risk of physical damage to ballots. Moisture, water splashes, or poorly protected storage conditions can affect the condition of voting documents.
Second, the risk of compromised voter privacy. Voting booths must provide a sufficiently enclosed space so that a voter’s choice cannot be seen by others. The layout, lighting, and physical condition of the booth should be inspected before the TPS opens.
Third, mobilization challenges. TPS facilities should be easy to carry, store, and assemble. This becomes increasingly important when the TPS location is far from the village center or requires distribution through several routes.
TPS Facility Solution Package from ALVAboard
The ALVAboard Election Pilkades Voting Booth and Ballot Box Package uses Polypropylene (PP) Corrugated Sheet, which is lightweight, water-resistant, suitable for repeated use, and recyclable.
ALVAboard develops corrugated plastic-based products through its in-house production facility in Tangerang. This manufacturing capacity is part of ALVAboard’s positioning as a pioneer in Polypropylene-based solutions for various protection and packaging needs.
ALVAboard Voting Booth 50 x 60 x 50 cm
The ALVAboard Election Pilkades Voting Booth has a configuration of 50 cm x 60 cm x 50 cm, with a foldable design that can be assembled using a knockdown system.
These dimensions provide a practical voting space while making it easier to plan the placement of facilities at the TPS. Since the booth can be folded, it is also easier to store and mobilize before being assembled at the voting location.
Polypropylene Corrugated Sheet has water-resistant characteristics, making it suitable for use in environments that may be humid. Its resistance to bending and tearing during normal use also helps maintain the booth structure when it is moved and assembled.
The most important aspect of a voting booth is voter privacy. The PP panels, which are not easily see-through, help create a more enclosed voting space. However, the committee should still conduct a direct inspection of the level of privacy, as lighting and the position of the booth at the TPS can affect the actual conditions.
ALVAboard Ballot Box 40 x 40 x 55 cm
The ALVAboard Election / Pilkades Ballot Box has dimensions of 40 cm x 40 cm x 55 cm and is used as part of the ballot storage facilities.
The Polypropylene Corrugated Sheet construction provides a lightweight yet sturdy structure. The box is designed to withstand impacts and stacking pressure when used according to its capacity and logistics handling procedures.
The box is also equipped with a ballot slot and security seal holes. These features help committees implement physical security mechanisms in accordance with the Pilkades regulations applicable in their respective regions.
To view available purchasing channels and product information, committees can use the official ALVAboard Shopee store as one practical reference.
Performance Parameters of ALVAboard Voting Facilities
The performance of the ALVAboard TPS facility package can be assessed through a combination of material durability, dimensions, privacy, ease of mobilization, and reusability.
In terms of water resistance, Polypropylene Corrugated Sheet has water-resistant characteristics, so it does not easily absorb water when exposed to splashes or placed in a humid environment. This characteristic is relevant for voting booths and ballot boxes that must go through the distribution process before being used at the TPS.
In terms of physical durability, PP material has a lightweight yet sturdy construction. The booth is designed to be folded and reassembled, while the ballot box has a structure that supports ballot storage and mobilization needs.
In terms of privacy, the ALVAboard Voting Booth uses material panels that are not easily see-through. This helps create a more private voting space, although direct inspection is still necessary to ensure that the booth meets the needs of the TPS.
In terms of ballot security, the ALVAboard Ballot Box is equipped with a ballot slot and seal holes. This mechanism is part of the physical security facilities and its use must still follow the committee’s official procedures.
In terms of mobilization, the knockdown design of the booth makes the product more practical to store and transport before use. Meanwhile, the lightweight PP material helps officers when moving the facilities at the TPS location.
For environmental aspects, Polypropylene material is reusable and 100% recyclable. Reuse can extend the product’s useful life, while its recyclable characteristics provide an option for material management after its period of use has ended.
Readers who want to learn more about corrugated plastic-based solutions can visit the official ALVAboard website as a reference for Polypropylene products and material applications.
Village and TPS Procurement Needs
The procurement needs for Pilkades facilities should be calculated based on the number of TPS, number of voters, voting locations, distribution schedules, and the technical requirements set by each local government.
Large-scale procurement requires more structured planning. The committee needs to calculate the number of voting booths and ballot boxes for each TPS, prepare spare units if necessary, and ensure that all facilities arrive before the voting schedule.
The example from Tebo Regency shows how logistics needs can develop into significant quantities. For the 2026 Simultaneous Pilkades across 84 TPS, the committee prepared 272 ballot boxes and 724 voting booths along with other equipment.
Meanwhile, needs at the village or TPS level can be more flexible. Voting booths with a knockdown system and lightweight materials facilitate storage and mobilization, while their reusable characteristics allow the facilities to be used again as long as their condition continues to meet technical requirements.
From a sustainability perspective, the use of 100% recyclable material provides added value in managing the facilities after the event is completed. This approach aligns with procurement needs that increasingly consider material efficiency and waste reduction.
ALVAboard manufactures corrugated plastic solutions through its in-house facility in Tangerang. With this experience, ALVAboard has established its positioning as a trusted manufacturer that prioritizes material consistency and manufacturing processes.
The support of these production facilities and product development is part of ALVAboard’s vision to provide the best Polypropylene solutions in Indonesia for various application needs.
Secure Your 2026 Pilkades Logistics Readiness with ALVAboard
The readiness of voting booths and ballot boxes should not only be checked shortly before the TPS opens. P2KD needs to ensure that the quantity, physical condition, assembly system, transportation requirements, storage location, and security mechanisms have all been inspected before distribution.
In September 2026, several regions have entered the final stages leading up to voting day. In Belitung, logistics distribution began on September 14 for voting on September 20, while other regions have their own respective schedules and stages.
Since the implementation of Pilkades is determined according to regional regulations, the final specifications and quantity of facilities still need to be adjusted according to the decisions of the local government and the local organizing committee.
The ALVAboard Voting Booth and Ballot Box Package provides two complementary functions: the 50 x 60 x 50 cm Voting Booth to support voting privacy and the 40 x 40 x 55 cm Ballot Box for storing ballots. Both use Polypropylene material with water-resistant, lightweight, sturdy, reusable, and recyclable characteristics.
With an in-house production facility in Tangerang, ALVAboard provides TPS facility solutions developed for field requirements. This manufacturing capacity is part of ALVAboard’s journey as one of the largest producers in Indonesia for corrugated plastic-based solutions.
For committees that need facilities with measurable specifications and more sustainable material management, this package can be one of the options to evaluate according to the needs of each TPS.
CONSULT YOUR TPS FACILITY NEEDS
P2KD, village officials, and TPS committees can consult their needs for the ALVAboard Pilkades Voting Booth and Ballot Box Package, from the number of units, dimensions, and materials to the knockdown system and procurement requirements according to the voting schedule.
Make sure that facility requirements are adjusted to the number of TPS, site conditions, voter privacy needs, and the applicable technical requirements in each respective region.
To get information about the ALVAboard voting facility package, contact the ALVAboard team via WhatsApp at +62 877-9310-2838 or click the Contact Us button below to Consult Directly with the Main Factory Regarding Your TPS Facility Package.
