House renovation generally requires a budget of around IDR 2.500.000 to IDR 6.000.000 per square meter, depending on the scope of work, building condition, design, labor costs, and the quality of materials used. In addition to the main construction costs, the budget should also include work area protection to prevent existing floors from being damaged by tool impacts, friction, paint spills, or materials during renovation.
Renovation House Cost Components That Must Be Considered
House renovation costs consist not only of materials and labor services, but also supporting costs to protect existing areas while the work is in progress. Therefore, the preparation of the budget plan should take all requirements into account from the preparation stage.
The first component is labor costs. The payment system can be based on a daily rate or a lump-sum contract, depending on the type of work and the agreement with the contractor. Work such as demolition, floor installation, painting, ceiling installation, electrical work, and interior work has different levels of difficulty, which affects labor costs.
The second component is the main materials. Cement, sand, paint, ceramic tiles, granite, sanitary equipment, ceiling materials, and interior components need to be calculated based on the volume of work.
The third component that is often overlooked is work area protection and post-project cleaning. In fact, areas undergoing renovation have a high risk of being exposed to dust, paint splashes, cement, tool friction, or material impacts.
Minor damage to existing floors can also become an additional cost. Marble, granite, parquet, or ceramic surfaces that are scratched or broken may require repair or replacement. Therefore, protection costs should be viewed as part of risk management, rather than simply an additional expense.
Why Is Floor Protection Cost So Important During Renovation?
Floor protection is important because existing surfaces continue to be used as work areas during most of the renovation process. Workers bring tools, materials, ladders, construction equipment, and various other supplies that can put pressure on or cause friction against the floor surface.
For projects with high-value flooring, damage to just one section can disrupt the planned budget. Replacing or repairing materials such as marble and granite can cost up to millions of rupiah per square meter, depending on the type of material, area size, and extent of the damage.
Therefore, including temporary floor protection in the budget plan from the beginning can help reduce the risk of unexpected costs.
ALVAboard Floor & Wall Protector is designed as a temporary protective layer to help protect floor and wall surfaces during renovation work. Made from Polypropylene (PP), this product is sturdy, waterproof, and reusable.
This approach helps contractors and homeowners manage the risk of surface damage without disrupting the renovation workflow.
Technical Advantages of ALVAboard Floor & Wall Protector
ALVAboard Floor & Wall Protector is a Polypropylene (PP) surface protector in roll format, designed to help protect floor and wall areas throughout a project. The product has a thickness of 2 mm, a width of 1,25 meters, and is available in two roll length options, 10 meters and 5 meters, allowing users to adjust the size according to the area that needs to be protected.
2 mm Polypropylene Material with Waterproof and Mechanical Impact Resistance
The 2 mm thick PP material provides a protective layer against friction and light impacts from project activities during renovation. The surface is also 100% waterproof, helping protect floors from paint, water, cement, or other work-related liquid spills.
During renovation, materials such as ladder wheels, scaffolding, work tools, and materials that are repeatedly moved can come into contact with the floor. Using a surface protector helps create an additional layer between project activities and the existing floor.
Its moisture-resistant and easy-to-clean characteristics also make the material more practical for use in work environments that generate dust or dirt.
1.25 Meter × 10 Meter Roll Format for Larger Areas
The 1.25 × 10 meter variant is worth considering when the floor or wall area that needs protection is relatively large and requires longer material coverage. With a length of 10 meters in one roll, the installation process can be carried out more efficiently to cover the work area continuously, depending on the configuration and installation requirements in the field.
This variant can be a practical choice for renovation work with long protection areas, such as living rooms, corridors, commercial areas, or floor sections with relatively wide work paths. The material is also reusable, so it can be used again as long as it remains in suitable condition and meets the requirements for use.
More Flexible 1.25 Meter × 5 Meter Roll Format
Meanwhile, the 1.25 × 5 meter variant offers a more compact size, making it easier to use when the protection area does not extend too far. This size can help users adjust the material to specific sections that need protection without having to use a longer roll.
The 5-meter variant can be an option for homeowners or project teams who want to protect areas such as part of a room, access paths, room corners, or specific wall sections during renovation. Its more compact size also makes the material more practical to lay out and handle for smaller areas.
If you already know the size that suits your renovation area, check out the ALVAboard Floor & Wall Protector 1.25 × 10 meter and 1.25 × 5 meter options at the official ALVAboard Shopee store to view the products and place an order.
Both variants use 2 mm PP Corrugated Sheet material with a width of 1.25 meters and are reusable, allowing the size to be selected according to the area, installation pattern, and work requirements in the field.
ALVAboard Surface Protector Performance Parameters
ALVAboard Floor & Wall Protector has several characteristics that support surface protection needs during the renovation process. Polypropylene material provides 100% water resistance, while the 2 mm sheet structure helps protect surfaces from friction and project activities.
In terms of size, the product is available in 1.25 meter × 10 meter and 1.25 meter × 5 meter formats, allowing it to be laid out according to the floor or wall areas that require protection.
In terms of cleanliness, the PP surface is relatively easy to clean and does not easily produce dust particles. This helps keep the work area more organized throughout the project.
For repeated use, the material is reusable, allowing it to be used again as long as it remains in suitable condition and meets the requirements for use. Once it is no longer used, PP material also has recyclable characteristics, supporting more responsible material management.
To find out more about the product’s size and characteristics, readers can view the ALVAboard trusted floor protector catalog as a reference before determining their project protection needs.
Protection Solutions for Contractors and Homeowners
ALVAboard Floor & Wall Protector can be used for various renovation scales, from contractor projects to independent home renovations. For interior projects, the material can be used to protect floors during painting, ceiling installation, wall work, furniture installation, and material transportation.
For interior contractors, using a floor protector can be part of the work area preparation procedure. This protection becomes increasingly relevant when projects are carried out in homes or buildings that already have marble, granite, parquet, or ceramic flooring that will be maintained.
Meanwhile, for homeowners, using a protector can help keep areas that are not being renovated protected. The material can be laid out along worker entry and exit paths, tool storage areas, or floor surfaces adjacent to work areas.
With an in-house production facility in Tangerang, ALVAboard positions itself as a trusted supplier for PP-based surface protection needs. As a pioneer in sheet plastic products, ALVAboard develops solutions that can be used for various project and operational needs.
Save on Your Renovation Budget with ALVAboard
Accurately calculating renovation costs means not only calculating construction expenses but also anticipating the risk of damage that could add to overall spending. Floor protection is one simple step that can be included from the project preparation stage.
ALVAboard Floor & Wall Protector is made from PP with a thickness of 2 mm and is available in 1.25 × 10 meter and 1.25 × 5 meter roll formats. It is waterproof, resistant to impacts and friction, reusable, and recyclable. These characteristics make it an option for floor and wall protection needs during renovation work.
With manufacturing capacity in Tangerang, ALVAboard positions itself as one of the largest sheet plastic manufacturers in Indonesia and provides solutions aimed at users who need high-quality products.
In terms of brand positioning, ALVAboard is also present as the best choice in Indonesia for PP-based floor and wall protection needs that prioritize durability, cleanliness, and repeated use.
Get waterproof ALVAboard Floor & Wall Protector directly from the main factory.
Suitable for contractor renovation projects, interior work, and homeowners who want to protect floors and walls during the work process.
Let’s start protecting your renovation area with a more organized protection system. Contact the ALVAboard team via WhatsApp at +6287793102838 or click the button below now for consultation and the best offer.
