The ALVAboard Election / Village Head Election Voting Booth is made from Polypropylene (PP) Corrugated Sheet, with dimensions of 50 cm x 60 cm x 50 cm and a thickness of 2–3 mm. It is designed for voting activities that require protection against water, moisture, and physical damage. The material is 100% water-resistant, tear-resistant, easy to fold and assemble, and features an opaque structure to support voter privacy during the September 2026 Village Head Election.
Standards for Voting Booth Requirements in the September 2026 Village Head Election
A voting booth is one of the essential pieces of equipment at a polling station (TPS) because it is directly used by voters when casting their votes in secret. In the 2026 Simultaneous Village Head Election in Belitung, for example, voting booths were listed as part of the election logistics distributed together with ballots, ballot boxes, voting tools, ink, and other security equipment.
These requirements show that the readiness of voting booths needs to be considered as part of the overall TPS logistics system. Organizers not only need booths that are easy to assemble, but also need to consider location conditions, mobilization, storage, and protection against weather.
Weather risks are a particular concern when distributing logistics to areas with certain geographical access conditions. During the distribution of the 2026 Belitung Village Head Election logistics, the local government even paid special attention to the delivery of logistics to island areas because sea travel is affected by distance, waves, and weather conditions.
For village election organizers, there are at least three important parameters to check before determining the voting booth.
The first is voter privacy. The booth material should have an adequate level of opacity so that the voter’s activities are not easily visible from outside, including when exposed to brighter lighting.
The second is resistance to water and moisture. A booth used in a TPS area needs to be able to withstand damp conditions and water splashes without losing its shape or primary function.
The third is ease of mobilization. A lightweight, foldable booth with a knockdown system is easier to transport from the storage area to the TPS and assemble by officers before voting begins.
Detailed Specifications of the ALVAboard Election Voting Booth
The ALVAboard Election / Village Head Election Voting Booth uses Polypropylene (PP) Corrugated Sheet manufactured at ALVAboard’s production facility in Tangerang. PP material is selected because it is lightweight, water-resistant, suitable for repeated use, and recyclable.
With experience in developing corrugated plastic-based products, ALVAboard positions its manufacturing facility as part of its production capabilities for reliable Polypropylene solutions for various needs.
Precise 50 x 60 x 50 cm Dimensions for Voter Comfort
The ALVAboard Election / Village Head Election Voting Booth has a dimensional configuration of 50 cm on the left side, 60 cm on the front or middle section, and 50 cm on the right side.
These proportions are designed to create a practical voting space that is also easy to place on a table or in a TPS area. The material thickness is available in a range of 2–3 mm, allowing organizers to adjust it according to usage requirements and procurement specifications.
The folding or knockdown system is also an important part of the design because the booth can be stored in a more compact condition before use. Once it arrives at the TPS location, officers can assemble it according to the product construction.
100% Water-Resistant and Tear-Resistant Polypropylene Material
Polypropylene Corrugated Sheet provides 100% water-resistant properties that are relevant for use in TPS environments. Water splashes or damp conditions during mobilization do not cause PP material to absorb water like fiber-based materials.
In addition to being water-resistant, the booth is designed to withstand tearing and bending during normal use. This characteristic helps maintain the booth’s shape when it is moved, folded, assembled, or used during the voting process.
Privacy is also a key consideration. The material structure is not easily see-through, helping limit visibility from outside so that voters can cast their votes without their voting activities being visible to others.
To view the available online purchasing channels and ALVAboard product information, organizers can use the official ALVAboard Shopee store as one of the references.
ALVAboard TPS Logistics Performance Parameters
The performance of the ALVAboard Election Voting Booth can be assessed through several key characteristics directly related to TPS operational needs.
In terms of water resistance, Polypropylene material is water-resistant, making it more suitable for handling damp environments and the risk of water splashes during distribution and use.
In terms of privacy, the PP Corrugated Sheet structure is used to create booth panels that are not easily see-through. This supports the need for a voting space that provides a visual barrier between voters and people outside the booth. In practice, the level of privacy should still be checked directly by organizers based on lighting conditions and the TPS layout.
In terms of dimensions, the 50 x 60 x 50 cm configuration provides a measurable size for planning the TPS area, number of units, transportation, and storage.
In terms of mobilization, the knockdown design allows the booth to be folded before use, making it more practical to transport to the voting location. Once it arrives at the TPS, officers can assemble it according to the installation instructions.
Meanwhile, in terms of sustainability, Polypropylene material is reusable and recyclable. This means that the booth can be reused according to its condition and needs after the activity is completed, while the material can be directed to the recycling process at the end of its useful life.
As an additional reference for corrugated plastic-based solutions, readers can visit the official ALVAboard website to view more about its products and other solutions.
Village Procurement Support and TPS Needs
Voting booth requirements may vary depending on the number of TPS, number of voters, voting location, and technical provisions established by the local government or local Village Head Election committee.
For large-scale procurement, the committee needs to calculate the number of voting booths based on the requirements of each TPS, distribution schedule, storage space, and reserve requirements. This process should be carried out before the logistics begin to be distributed to avoid shortages of facilities on voting day.
Meanwhile, for additional needs at the village or TPS level, the lightweight and knockdown characteristics of the booth can help with storage and mobilization. The committee may also consider the possibility of reuse if the product remains in compliance with the required standards after the activity is completed.
This approach is in line with a commitment to material efficiency. The recyclable characteristics of Polypropylene also provide added value in terms of material management after its period of use.
ALVAboard develops products based on PP Corrugated Sheet through its in-house production facility in Tangerang. With this manufacturing experience, ALVAboard positions itself as a pioneer in Polypropylene solutions for various applications.
This manufacturing commitment is also supported by ISO 9001, ISO 14001, and Halal certifications according to company information. For logistics needs that require material consistency, this production capability is one of the factors that can be considered when selecting a high-quality product.
Make the September 2026 Village Head Election a Success with ALVAboard
The readiness of voting booths needs to be part of the TPS logistics checklist, rather than simply equipment prepared shortly before voting day. Size, privacy, water resistance, ease of assembly, mobilization, and physical condition after storage need to be checked before the booths are placed at the TPS.
The implementation of the September 2026 Village Head Election in several areas shows that logistics distribution had already taken place before voting day. In Belitung, for example, logistics for 13 villages began to be distributed on September 14 for voting on September 20, 2026, while island areas received special distribution arrangements.
Because the schedule and technical regulations for the Village Head Election may vary in each region, the final booth specifications still need to be adjusted according to the provisions of the local government and local organizing committee.
The ALVAboard Election / Village Head Election Voting Booth, made from Polypropylene, with dimensions of 50 x 60 x 50 cm, a thickness of 2–3 mm, water-resistant, moisture-resistant, tear-resistant, opaque, and featuring a knockdown system, can be one of the TPS facility options to consider in logistics planning.
With in-house production capabilities in Tangerang, ALVAboard strives to provide consistent corrugated plastic solutions for various needs. The development of this product is part of ALVAboard’s commitment to providing the best solutions in Indonesia while also considering material reuse and recycling.
CONSULT YOUR VILLAGE HEAD ELECTION VOTING BOOTH NEEDS
The Village Head Election Committee, village government, and procurement teams can consult their requirements for the number of units, material thickness, dimensions, knockdown system, and usage needs of the ALVAboard Election / Village Head Election Voting Booth with the ALVAboard team.
Make sure the booth specifications are adjusted to the number of TPS, site conditions, voter privacy requirements, and applicable technical provisions in the area where the Village Head Election is held.
For more information about Polypropylene voting booth requirements, contact the ALVAboard team via WhatsApp +62 877-9310-2838 or the Contact Us button to Consult Your Polypropylene Voting Booth Needs Directly from the Main Factory and Complete Your Village Head Election TPS Facilities Now.
